| Availability | Usually ships in 1-2 weeks. |
|---|---|
| Arm Dimensions | 23" W x 7.5" H |
| Shade Dimensions | 12" Diameter, 7" Height |
| Arm Extension | AE15 |
| Max Wattage | Incandescent Bulbs: 100W Florescent Compact : 26, 32 or 42W* HID (MH and HPS): 35, or 50W* Call 888-320-0628 for ballast options |
Arm Dimensions: 23" W x 7.5" H ;
Shade Dimensions: 12" Diameter, 7" Height
Installation Instructions For Mounting Shade With Arm Mount
- Disconnect power at main electrical box, prior to installation.
- Verify that wires from shade are long enough for arm provided.
- Feed lead wires through arm and thread shade onto arm.
- Insert small gasket into wall plate. Place arm into wall plate and tighten set screws. Set large gasket in place.
- Make wiring connections according to local and national codes.
- Attach wall plate with arm assembly to junction box.
- With wall plate mounted, loosen set screws and adjust arm to correct position. After adjusted, place arm in wall plate firmly and tighten set screws.
- Use generic sealant to prevent water entry.
Important - End of arm must be square and compress gasket adequately to provide wet location.
